What a lone worker should have on hand before heading out solo
Why a practical readiness checklist matters for solo workers
Working alone is part of many jobs in New Zealand: tradespeople, rural contractors, cleaners, security guards, and field technicians all spend hours without a colleague nearby. The risks are not hypothetical. A fall, a sudden medical event, or an encounter with an aggressive person can turn a normal day into a crisis when no one is there to notice. A well-prepared lone worker does not rely on luck. They carry a set of tools and habits that reduce the time between an incident and help arriving. This article offers a practical emergency readiness checklist built around the realities of working solo, with a focus on the kind of devices and plans that make a real difference in remote or isolated settings.
Your primary alert device: something that works when you cannot speak
The most important piece of kit for a lone worker is a device that can summon help even if you are unconscious, pinned, or unable to reach a phone. A standard mobile phone is useful, but it depends on you being conscious, able to unlock it, and having signal. In many rural or basement locations, mobile coverage drops out entirely. That is where a dedicated personal alarm with GPS becomes essential. A GPS personal alarm sends your location to emergency contacts or a monitoring service at the press of a button, and some models activate automatically if they detect a fall or a period of no movement. Unlike a phone, these devices are built to work in low-signal areas by using satellite networks or a combination of cellular and satellite positioning. When you are working alone, your alert device is your only link to the outside world. It should be worn on your body, not left in the vehicle or toolbox. Check the battery level at the start of every shift, and know exactly how to trigger an SOS. If the device requires a subscription or a SIM card, confirm that it is active and topped up before you leave the workshop or home.
Fall detection and man-down alerts: when you cannot press the button
A fall is one of the most common emergencies for solo workers. Ladders, roofs, uneven ground, and wet surfaces are part of many trades. If you hit your head or break a limb, you may not be able to reach the SOS button. That is why a device with automatic fall detection or a man-down alert is a significant safety net. These sensors detect a sudden impact and a period of stillness, then send an alert without any action from you. Some devices also include a pre-alert: a short countdown or a vibrating warning that gives you a chance to cancel the alarm if it is a false trigger. For a contractor climbing in and out of a vehicle or moving through a worksite, a pre-alert reduces nuisance calls while still providing protection. When choosing a device, test the fall detection sensitivity in the conditions you actually work in. A device that works well for a warehouse worker may not be suitable for someone climbing scaffolding. Read the manual and adjust the settings if possible. Know what triggers a false alarm and how to cancel it quickly, because a false alarm that wastes emergency services time can be as problematic as no alarm at all.

Emergency contacts and a response plan: who gets the alert and what they do
A GPS personal alarm is only as useful as the response behind it. If the alert goes to a phone number that is not monitored, or to a contact who does not know what to do, the device becomes an expensive accessory. Before you start any solo job, confirm that your emergency contacts are current and that they understand their role. The person receiving the alert should know your general location, the nature of your work, and what steps to take if they get a notification. They should have a list of local emergency services numbers, and they should know when to call for an ambulance versus when to call a site supervisor or a family member. If you use a monitoring service, understand what they do with the alert. Some services call your emergency contacts first, others dispatch emergency services directly. Know the difference and set expectations with your contacts. A written response plan does not have to be long: it can be a single page kept in your vehicle or shared digitally with your contacts. It should list your name, your vehicle registration, your typical work locations, any medical conditions or allergies, and the phone numbers for the local police, fire, and ambulance services. Review this plan every few months, especially if you change jobs or move to a new area.
Communication backup: when the device needs a phone call
Not every emergency requires a full SOS response. Sometimes you just need advice, a second opinion, or a check-in because you feel unsafe. A device that supports two-way voice communication allows you to speak to a responder or a monitoring centre without needing to pull out your phone. This is particularly useful if you are in a situation where speaking aloud is safe but you cannot stop what you are doing to dial. Some lone worker alarms include a built-in speaker and microphone, so you can talk hands-free while continuing to work. If your device does not have voice capability, make sure you carry a phone that is fully charged and has a backup power source. A portable power bank is cheap insurance. For remote locations, consider a satellite messenger or a device that can send SMS alerts even when there is no mobile signal. The key is to have at least two ways to communicate: your primary alert device and a secondary method. That way, if one fails due to battery, damage, or coverage, you still have a way to reach someone.
Location sharing and check-in routines: making sure someone knows where you are
GPS location is a core feature of any modern lone worker system. But the location data is only useful if someone is looking at it. A common practice is to set a check-in schedule: every hour, or at the start and end of each job, you send a message to a contact or a monitoring service to confirm you are okay. If you miss a check-in, the system escalates. This routine turns a passive GPS device into an active safety net. Many GPS personal alarms allow you to share your location in real time with a designated contact through an app or a web portal. That contact can see where you are on a map, and if you stop moving for an unusual period, they can check on you. For contractors who move between multiple sites in a day, this feature is especially valuable. It also helps if you are working in an area with poor address visibility, such as a large farm or a construction site. Your contact can guide emergency services to your exact position rather than just to the property entrance. Make sure your contact knows how to access the location data and that they have the app or link saved on their own phone. Test the location sharing feature before you rely on it in a real situation.
For New Zealand contractors looking for a robust solution that combines SOS, GPS, fall detection, and two-way voice without ongoing monitoring fees, loneworkeralarms.co.nz offers a practical option that aligns with the needs of solo workers in remote locations.

What to do when an alert is triggered: staying calm and giving clear information
An emergency is not the time to learn how your device works. Practice triggering the SOS button and speaking to a responder. If your device has a test mode, use it regularly. When you press the button, stay as calm as possible. Speak clearly and state your name, your location, and the nature of the emergency. If you cannot speak, the device should still transmit your GPS coordinates and a pre-recorded message or a text alert. Know what happens after you press the button: does it call a number, send an SMS, or trigger a monitoring centre? Does it keep a line open so the responder can hear what is happening? Some devices automatically dial a number and put the call on speakerphone. If yours does that, be aware that background noise can make it hard for the responder to understand you. Try to move to a quieter spot if it is safe to do so. If you are in immediate danger, such as a physical threat, use the SOS button without hesitation. Do not wait to see if the situation improves. The device is there to be used.
Environmental hazards and personal safety: beyond the device
Technology is a critical layer of safety, but it does not replace good judgment and basic preparation. Before you start a solo job, assess the environment. Is the weather going to change? Is the ground stable? Are there animals, machinery, or members of the public nearby? Carry a basic first aid kit that you know how to use, and keep a charged phone in a waterproof case. If you are working with electricity, gas, or heavy equipment, follow all safety protocols and never bypass a guard or a safety switch. If you encounter a gas smell, turn off the supply if it is safe to do so, open windows, leave the area, and call a qualified gas technician. Do not use any switches or flames, and do not wait for the smell to clear. For electrical work, assume every circuit is live until you have tested it with a voltage tester. If you are unsure about any task, stop and call a supervisor or a qualified professional. No job is worth a serious injury that could have been prevented with a simple check.
Maintaining your gear: a monthly check that takes five minutes
A device that sits in a drawer for months may have a dead battery or a corrupted SIM card. Set a recurring reminder to check your lone worker alarm. Charge it fully, test the SOS button, confirm that the GPS location is accurate, and verify that your emergency contacts are still correct. If the device uses a subscription, check the expiry date. If it uses a SIM card, check that it has credit and signal. Replace any worn or damaged straps or clips. A device that falls off your belt and gets lost is useless. Keep the device clean and dry, especially if you work in dusty or wet conditions. Many devices are water-resistant but not waterproof, so do not submerge them. If you drop the device or it takes a hard knock, test it immediately to make sure it still works. A cracked case may let in moisture, which can cause a short circuit later. Treat the device like you would a fire extinguisher: inspect it regularly, and replace it if it shows any signs of damage or age.
For contractors who want a straightforward, reliable system that covers SOS, GPS, fall detection, and man-down alerts without the complexity of mandatory monitoring contracts, loneworkeralarms.co.nz provides a New Zealand-based option designed for the realities of solo work.

Staying ready without overcomplicating it
Emergency readiness for a lone worker does not require a warehouse full of gear. It requires a small set of reliable tools, a clear plan, and the discipline to check them before every shift. A GPS personal alarm with fall detection, a charged phone, a list of emergency contacts, and a routine check-in schedule cover the vast majority of scenarios a solo contractor will face. The key is to make these checks a habit, not an afterthought. When you are alone on a site and something goes wrong, the few minutes you spent preparing in the morning can be the difference between a quick response and a long wait. Keep your device on your body, keep your contacts informed, and never hesitate to use the SOS button. That is what it is there for.